This article will show you how to expand a Nutanix cluster with a new node received from the factory. This article will also highlight a few common warning alerts that you might receive, and how to address them.
Category: Manuals & How-To’s
This lesson will describe how to enable Acropolis Container Services (ACS) on Nutanix Community Edition (CE).
This lesson will show how to configure the Self Service Portal (SSP) on Nutanix AHV running AOS 5.1.x. The Prism Self Service Portal (SSP) enables the consumers of IT infrastructure within an enterprise (individual users or teams such as development, test, and DevOps) to provision and manage virtual machines in a self-service manner, without having […]
This post is meant to be a "quick reference" guide for performing configuration with AHV networking, including Open vSwitch (OVS) configuration, setting VLAN tags and other miscellaneous networking related commands. For further details and a helpful video, check out this post by Jason Burns which goes a bit deeper into which configurations you should use […]
A great writeup for this process with detailed information is located here: https://blogs.vmware.com/PowerCLI/2017/04/powercli-install-process-powershell-gallery.html In a nutshell: You might be prompted for a new version of “NuGet”, which is fine- go ahead and say “yes” to the prompt to install. Then proceed with the below. Once that completed, the VMware PowerCLI Cmdlets were installed. However, when […]
# Shows BMC/IPMI version for all hosts in cluster- Run from one CVM in cluster # Shows BIOS version for all hosts in cluster – run from one CVM in cluster
This how-to will show you how to configure a VM to VM anti-affinity rule on Nutanix AOS 5.0. For reference, the official documentation on this feature is found at: https://portal.nutanix.com/#/page/docs/details?targetId=Web-Console-Guide-Prism-v50:ahv-ahv-vm-anti-affinity-t.html Currently, on AOS 5.0, you can set a VM to Host affinity rule right within Prism by editing the VM properties. However, setting up a […]
This lesson will show you how to patch VMware ESXi using the Nutanix one-click upgrade process in Prism. If you have additional questions not covered in this how-to, please refer to the Nutanix Documentation Link for the one-click hypervisor upgrade feature, located here: https://portal.nutanix.com/#/page/docs/details?targetId=Web-Console-Guide-Prism-v50:wc-cluster-hypervisor-upgrade-esx-wc-t.html
To perform core VM management operations directly from Prism without switching to vCenter Server, you need to register your cluster with the vCenter Server. This how-to will show you how to register vCenter with Prism running Nutanix AOS 5.0. By using this feature you can perform following virtual machine operations directly through Prism. Create, clone, […]
This article will show you the steps involved to setup Acropolis File Services (AFS) on a cluster running AOS 5.0. Acropolis File Services (AFS) uses a scale-out architecture that provides Server Message Block (SMB) file shares to Windows clients for home directory and user profiles. Acropolis File Services consist of three or more file server […]